Thank you guys for a lot of good suggestions I will try them all when I get home.

I also want to add a bit more information that may direct suggestions towards a correct one.

When I print I have warping in my support structure which eventually comes loose and messes up entire print.

I am having problems with PLA warping when printing medium size objects due to cold weather and I was wondering does any one have any suggestions how to fix this problem?

My current configurations.
Bead temp: 75
extrude temp: 195
bed adhesive: strong hair spray.

Wow nice work.

I also just assemble my e3d hot end and printed all of the parts to mount it on my makergear m2.
I was wonder is there some thing that I need to know before I start using e3d hot end?

I have tried to attached factory file with multiple extensions but this website does not allow me. I have attached an image of my extruder settings to this post if you need any more images please ask me. image4.jpg I also have one more problem if any one can help me with it, I will greatly appreciat...

Hey guys does any one know how to fix the problem seen in the image below?

First I would like to thank every one for reply. I just want to post a small update of what I have done since then. 1) After spending more time researching I learned that I had small clog in my nozzle from day one which can be seen in my first image. It is a lot of small waves in each layer. After c...

I have added few more pictures I took with $50 microscope.

This was printed with original roll of PLA that came to me with my MakerGear M2 Kit.

If you look in the middle of the image you will see a lot of mess ups in the print each one of them is about 1 mil in size. I will do my best to get better picture tomorrow morning.

I am new to 3d printing and can not help you .

I was wondering can you send me the file that you used to print the "dial indicator mount". I am thinking about buying same indicator and will need a mount for it.

I just got my kit assembled this week and have a small problem when printing my first print (image attached below).
Oddly enough this problem mainly occurs on one side of the print.

If any one knows the solution to this problem please let me know.