i did lower the printing speed and tighten all screws a bit more to help it out

[attachment=0]20150824_211234_resized.jpg[/attachment IMG=20x20]

okay, printed seems to be fairly even minus a but if over extrusion

ill give that a shot. im using simplify3d btw.

Hi, be having some difficulties getting my prints out nicely. It seems every couple of layers the next layer shifts a mm on the y axis. I know there are a few posts on layer shifting but it seems in my case its almost random, where a flat wall would be, well flat, its waves back and forth. Take a lo...

Okay so talked with tech support and turns out the y axis power on the rambo was backwards. So bit of a derp moment and didnt catch it when i went through the plug ins so that part is working. Now thw more pressing issue is the z end stop. I did manage to get it to print a cube fine, With a bit of d...

No simplify is set for the specific one I have. I emailed tech support. See what they think

hi, i built my m2 a few days ago but have yet to actually been able to print anything yet. first off im using simplify3d for my software i can get the x and the z axis at zero and whenever i hit the home button the zip back to their zero setting. In y axis case i'll move the base over to the y end s...