I changed to a BIQU extruder as I didn't want a printed extruder in 2022. Also it is running Klipper and I am loving the LCD display.
Here are the files:
https://www.thingiverse.com/thing:5388063
Video of it working:
https://share.icloud.com/photos/001XSyH ... Vwtztkapsg
Search found 185 matches
- Tue May 17, 2022 8:41 pm
- Forum: Modifications
- Topic: MakerGear M2 BIQU H2 V2 Extruder Mount
- Replies: 1
- Views: 12429
- Thu Feb 02, 2017 5:24 pm
- Forum: Tech Support
- Topic: Bad feed drive stepper or other issue?
- Replies: 4
- Views: 10057
Re: Bad feed drive stepper or other issue?
Pinion ordered. I was able to remove the bad one with pliers and heat gun. Thanks.
- Thu Feb 02, 2017 5:21 pm
- Forum: General Discussion
- Topic: Will Makergear ever fix the pinion problem?
- Replies: 9
- Views: 22090
Re: Will Makergear ever fix the pinion problem?
I heated it with a heat gun for a minute and it pulled off without any trouble with a pliers.
- Wed Feb 01, 2017 9:58 pm
- Forum: Tech Support
- Topic: Bad feed drive stepper or other issue?
- Replies: 4
- Views: 10057
Re: Bad feed drive stepper or other issue?
I took off the gearbox and wanted to ask if this is how this pinion is supposed to look, or if half of it is sheared off: https://s24.postimg.org/g6fjlfout/Full_Size_Render.jpg Just spinning the removed gearbox, that spins freely and the cogs look ok under a stereo microscope. Assuming this pinion h...
- Wed Feb 01, 2017 5:09 pm
- Forum: Tech Support
- Topic: Bad feed drive stepper or other issue?
- Replies: 4
- Views: 10057
Bad feed drive stepper or other issue?
I was making a print and then heard the printer making a bad skipping sound. I went to look, and the filament was tangled on the spool. I untangled it, but now I can't get the printer to work again - it skips when feeding. I took apart the feed system and cannot find any clogs or binding. I noticed ...
- Mon Jun 06, 2016 1:30 am
- Forum: General Discussion
- Topic: Favorite Print Surface?
- Replies: 61
- Views: 90372
- Sun Jun 05, 2016 9:34 pm
- Forum: General Discussion
- Topic: Favorite Print Surface?
- Replies: 61
- Views: 90372
Re: Favorite Print Surface?
Made this Mic-6 plate today:
I use purple gluestick. Gluestick or certain types of hairspray are the way to go.
I am always surprised when I see people still using obsolete surfaces such as Kapton tape, painter's tape, ABS glue, etc.
I use purple gluestick. Gluestick or certain types of hairspray are the way to go.
I am always surprised when I see people still using obsolete surfaces such as Kapton tape, painter's tape, ABS glue, etc.
- Sun May 29, 2016 5:11 pm
- Forum: Printed Object Showcase
- Topic: Printed a MTB stem.
- Replies: 4
- Views: 9264
Re: Printed a MTB stem.
Yes. I just rode down some stairs.
- Sun May 29, 2016 3:07 pm
- Forum: Printed Object Showcase
- Topic: Printed a MTB stem.
- Replies: 4
- Views: 9264
Printed a MTB stem.
I have a real 60mm on order, but got impatient, so I designed and printed a 50mm one out of eSun PETG-G to see what it would be like:
http://www.thingiverse.com/thing:1594904
http://www.thingiverse.com/thing:1594904
- Fri May 27, 2016 11:51 pm
- Forum: Filament
- Topic: eSun PLA+ filament
- Replies: 38
- Views: 67383