Search found 1997 matches
- Fri Mar 23, 2018 1:06 am
- Forum: Tech Support
- Topic: Steppers acting weird
- Replies: 11
- Views: 16892
Re: Steppers acting weird
Reflashing doesn't clear the firmware. What's the output of an M503 command?
- Thu Mar 22, 2018 7:03 pm
- Forum: Filament
- Topic: esun epa question
- Replies: 11
- Views: 16897
Re: esun epa question
I personally just used dollar-store white Elmer's glue that you used to use in gradeschool to put glitter on potatoes or whatever.
- Thu Mar 22, 2018 4:31 pm
- Forum: Filament
- Topic: esun epa question
- Replies: 11
- Views: 16897
Re: esun epa question
I did do a search but saw no real answer. Will EPA stick to the polyimide tape of the M2 Build plate, or does it need other things applied? In general, regardless of filament type, when I see reference to glue stick and blue tape, hair spray, abs slurry etc, is this in place of the polymide tape or...
- Thu Mar 22, 2018 3:48 am
- Forum: Tech Support
- Topic: Steppers acting weird
- Replies: 11
- Views: 16892
Re: Steppers acting weird
What about an M502 to reset the EEPROM to the flashed firmware values? Follow it with an M500.
- Wed Mar 21, 2018 4:09 pm
- Forum: Tech Support
- Topic: Steppers acting weird
- Replies: 11
- Views: 16892
Re: Steppers acting weird
You don't use negative steps per millimeter ...
- Fri Mar 16, 2018 8:55 pm
- Forum: Tech Support
- Topic: Sudden uphill battle with PETG?
- Replies: 8
- Views: 14493
Re: Sudden uphill battle with PETG?
Thanks for the info guys! I had no idea the nozzles had such a limited lifespan. Regarding the hot end, can the physical hot end itself have any issues? Would swapping out just the thermistor/nozzle/heater cartridge have the same effect? Checked the potential feed path issues, all seem ok. Another ...
- Wed Mar 14, 2018 4:08 pm
- Forum: Tech Support
- Topic: Sudden uphill battle with PETG?
- Replies: 8
- Views: 14493
Re: Sudden uphill battle with PETG?
Seconding consider it consumable. That's why you can buy nozzles by themselves :) For reference, I have 6x M2s, about 600 hours a month of printing -- and I keep 8 SPARE v4 hotends, and 16 nozzles of different sizes (about 60/30/10 0.35/0.5/misc). Most of the nozzles are blowtorched and ultrasonicly...
- Fri Mar 09, 2018 4:27 am
- Forum: General Discussion
- Topic: Visible layers and startpoints
- Replies: 1
- Views: 5107
Re: Visible layers and startpoints
Lower your extrusion multiplier by 0.02, and align the seam.
- Fri Mar 09, 2018 4:27 am
- Forum: Tech Support
- Topic: Printer not working due to mainboard failure?
- Replies: 6
- Views: 8519
Re: Printer not working due to mainboard failure?
You *may* have blown a MOSFET, but it's more likely you blew one of the little beige fuses near the power inputs.
If your LCD isn't working, swap cables A & B.
If your LCD isn't working, swap cables A & B.
- Thu Mar 08, 2018 5:37 pm
- Forum: Filament
- Topic: Empty Spool Weight Database?
- Replies: 2
- Views: 7609