New owner/assembler of M2 kit here. Question about the M24x50 screw.
Couldn't find instructions beyond this, page 14:
http://cdn.shopify.com/s/files/1/0030/7 ... ly.pdf?849
Could anyone inform me as to purpose and height setting for this screw?
Thanks!
M4x50, under heat plate
Re: M4x50, under heat plate
adjustable z-stop?
Re: M4x50, under heat plate
Yes, it's there to engage the Z-stop switch. Ithink most of us would prefer a more elegant solution, but it works. You may prefer having the nut on the bottom instead of the top, where it's easier to reach. When you install the Z-stop switch, you will want to rotate the switch mount until the switch is in good, solid contact with that bolt.
Re: M4x50, under heat plate
____________________________________________________
See my projects at https://www.theneverendingprojectslist.com
See my projects at https://www.theneverendingprojectslist.com
Re: M4x50, under heat plate
Awesome, thanks for the great info! I appreciate it. And fast too!