Hey all! After a little less than a year, I've realized that the dual extruder was kind of a waste for me.
Is there an easy guide to remove it, or is it basically just work backwards from the guide used to install it?
Thanks
Removing the dual extruder
-
- Posts: 277
- Joined: Fri Oct 02, 2015 5:37 am
Re: Removing the dual extruder
I came to the same conclusion and removed mine.
You can look for the V4 hotend instructions.
https://cdn.shopify.com/s/files/1/0030/ ... 7274837590
You can look for the V4 hotend instructions.
https://cdn.shopify.com/s/files/1/0030/ ... 7274837590
M2 - V4, MIC-6 Build Plate, Astrosyn Damper's(X/Y), Rev. E, Geeetech LCD
S3D - FFF Settings https://forum.simplify3d.com/viewtopic.php?f=8&t=2367
Print Quality Troubleshooting https://www.simplify3d.com/support/prin ... eshooting/
S3D - FFF Settings https://forum.simplify3d.com/viewtopic.php?f=8&t=2367
Print Quality Troubleshooting https://www.simplify3d.com/support/prin ... eshooting/