Page 1 of 1
Broken M2 Extruder Motor Mount Replacement
Posted: Sun Oct 12, 2014 3:51 pm
by ou812grn
Can someone please tell me where I could purchase a M2 Extruder Motor Mount replacement or could someone please print me a replacement? Thanks, Richard
Re: Broken M2 Extruder Motor Mount Replacement
Posted: Sun Oct 12, 2014 8:42 pm
by jsc
If your old one is just cracked, or otherwise not too badly destroyed, you can epoxy it up and it will work long enough to print off a replacement in ABS.
Otherwise, the easiest thing is to contact MakerGear for one.
Re: Broken M2 Extruder Motor Mount Replacement
Posted: Sun Oct 12, 2014 10:03 pm
by ou812grn
Trying that now.
Re: Broken M2 Extruder Motor Mount Replacement
Posted: Thu Oct 16, 2014 8:22 pm
by Capt. John
I used coat hanger wire to make an emergency repair to print one out.
This part is known to break and having a couple spares already printed out is the only way to go.
Here's the link to M2 parts:
https://github.com/MakerGear/M2/tree/a3 ... 0Parts/STL
The part you're looking for is the 4th one down named:
M2 Extruder Motor Mount r2.stl