It's awesome.
I ordered one at work a few months ago and at this point I've been working with it for a few weeks. We haven't done much needing dual-head functionality yet but I'm impressed by the print quality; It outdoes my M2 and it blows away our TAZ. First time setup was easy and the build quality is exceptional. The filament compartment and guide tubes are thoughtfully designed but one of my only complaints is that it doesn't fit 3kg spools. This is minor as it's easy to position a standalone spool holder next to the printer with the filament compartment door open. I also plan to put a PEI surface on one side of the build plate so we still have the option to flip it and use the kapton. I do wish PEI were standard.
If we find ourselves needing yet another printer it will be a no-brainer to buy another of these. I would choose this over (for example) a Stratasys any day.
~Justine
Ultra One First Impressions
Re: Ultra One First Impressions
Thank you for posting Justine!
Rick
Rick
Re: Ultra One First Impressions
Does the Ultra one still use printed parts such as the exruders or is it total different than the M2/3's? What does it use for hotends?
-Steve
-Steve
____________________________________________________
See my projects at https://www.theneverendingprojectslist.com
See my projects at https://www.theneverendingprojectslist.com
-
- Posts: 7
- Joined: Tue May 08, 2018 2:49 am
Re: Ultra One First Impressions
Hi Justine,
Thank you for the feedback. May I ask what types of filament have you been printing with? How large is the object? And finally, are you using an air filtration system such as the BOFA 3D Print Pro 3 ?
Thanks.
Thank you for the feedback. May I ask what types of filament have you been printing with? How large is the object? And finally, are you using an air filtration system such as the BOFA 3D Print Pro 3 ?
Thanks.
-
- Posts: 7
- Joined: Tue May 08, 2018 2:49 am
Re: Ultra One First Impressions
Hi Justine,
It's hard to believe that it's been more than three months since your post. Do you have any experiences that you can share with us?
Plus - If you don't mind my asking, why would you choose the Ultra One over a Stratasys?
Thank you.
It's hard to believe that it's been more than three months since your post. Do you have any experiences that you can share with us?
Plus - If you don't mind my asking, why would you choose the Ultra One over a Stratasys?
Thank you.
-
- Posts: 7
- Joined: Tue May 08, 2018 2:49 am
Re: Ultra One First Impressions
Hi Justine,
Wanted to ask - are you still using the Ultra One?
Thanks.
Wanted to ask - are you still using the Ultra One?
Thanks.