Leveling Bed... watch out for the length of the screw
Posted: Sat Oct 17, 2015 7:25 pm
obviously i am new and leveling the bed i involuntary unscrew a little too much one of the 3 screw and during a 5 hour print one of the screw unscrew himself after around 3 hour and half.
good lesson learn but i felt the need to write here to let other know that when u level the bed is always better to be toward the end of the run of the screw not in the middle or you may have a screw that is "looser" then the other and end up with a problem similar to the one i had
^_^
good lesson learn but i felt the need to write here to let other know that when u level the bed is always better to be toward the end of the run of the screw not in the middle or you may have a screw that is "looser" then the other and end up with a problem similar to the one i had
^_^