Re: First Order Tie Pilot Helmet
Posted: Sun Mar 06, 2016 2:14 am
Hi Will, I'm not on FaceBook if that's what you mean
Here is the finished helmet. The attachments for the oxy hose were also printed in pla. I then finished them up and made a mold (my first one) after which I cast them using an aluminum filler (more learning experiences). Not as metal looking as I wanted but better than painted. Naturally I did some interior work as well by printing some fan guides and attachments to keep the visor clear. The were painted Krylon chrome and brushed over afterwards with steel wool.
Here is the finished helmet. The attachments for the oxy hose were also printed in pla. I then finished them up and made a mold (my first one) after which I cast them using an aluminum filler (more learning experiences). Not as metal looking as I wanted but better than painted. Naturally I did some interior work as well by printing some fan guides and attachments to keep the visor clear. The were painted Krylon chrome and brushed over afterwards with steel wool.