PLA to PEEK - M2s can hang

The place to discuss filament...
Post Reply
mlhmail
Posts: 14
Joined: Mon Jan 05, 2015 5:09 pm

PLA to PEEK - M2s can hang

Post by mlhmail » Wed Apr 29, 2015 4:03 pm

Matt from 3DXTech here. We have two M2's - one with the v4 hot-end and the other modified with the E3D v6 all-metal hot-end. Both are excellent machines and can handle basically anything we've thrown at them (like the subject line said - PLA to PEEK). The v4 is very nice and prints pretty much anything we've thrown at it that processes under 300c. The other M2 that has the v6 holds steady at 400c and we use that one exclusively for high-temp / exotic filaments.
We have 5 other printers, but these two are our go-to workhorses. Hats off to MG!
Top
User avatar
rpollack
Posts: 494
Joined: Wed Apr 09, 2014 9:01 pm
Location: Beachwood, OH
Contact:
Contact rpollack

Re: PLA to PEEK - M2s can hang

Post by rpollack » Fri May 01, 2015 3:54 pm

Thank you Matt!
Top
Post Reply

Return to “Filament”