Hi Guys,
My name is Miguel Chaparro and i have a M2 and recently i have purchased a L-Cheapo, but i made a mistake and don't check out output voltaje of the extruder (V3A) before of buy, and L-Cheapo works at 24V.... So my question is:
What i can do? Any suggestions?
Bye.
L-Cheapo
Re: L-Cheapo
I'd start by contacting the L-Cheapo guys and seeing if it'll run at 19v.
I'd then use the 19v supply to switch the ground on a 24v supply if it won't run on 19v.
I'd then use the 19v supply to switch the ground on a 24v supply if it won't run on 19v.
Custom 3D printing for you or your business -- quote [at] pingring.org
Re: L-Cheapo
Problem solved!,
L-Cheapo works on voltages from 10V to 24V.
L-Cheapo works on voltages from 10V to 24V.
Re: L-Cheapo
How do you plan on preventing damage to parts of the machine under what your cutting while using the l-cheapo... i definitely looks like an interesting thing to try.. but i am curious what you use under whatever your cutting.
M2 - MKS SBase w Smoothieware, GLCD, 24v, Upg Z & extruder stepper - IR bed leveling, Astrosyn dampers X/Y/Z, MIC 6, Zebra, PEI, & glass Build Plates - E3D, V3B Hotends, & more - many other 3d printers - production printing.